Hey guys today I’m gonna be showing a quick tutorial on how to change the Vents in my case I’m gonna be painting the background white because my car is white but this side that vent and the driver side but what you will need for all this to take apart is a regular screwdriver and a star type t20 it’s by six I’m using my case a drill but you can use there’s different versions there’s like a screw driver version but you’re gonna start by using a screwdriver it’s always gonna be on this side you don’t take it off over on this side because there’s a little rubber piece and if you lose that it’s gonna be falling quick cuz I already lost more on this side it’s really quick if it just Falls around by itself but you’re gonna start buying in this case hold it straight put the screwdriver pick it up we’ll see if this thing comes out and there’s a little rubber piece right here I don’t know if you see that not too high okay there’s one piece the same with this one put it up we’ll take it out same same as the other side and they’re all going saying here’s the rubber piece that’s what I was talking about not to who’s that right okay put it back on and then this is when the drill comes in there’s two bolts right here right there don’t BES like that don’t don’t press it too fast cos you’ll break it but then use the screwdriver if you have seat warmers it’s gonna be a little more difficult to take it out but you you just take it out like with the screwdriver start by taking these out then what I usually do put my finger cuz I got long fingers can you press them out each side same process can you hold one side and then you pull the other side don’t move make it lower and then there’s the e ESB for traction control then you hold this side you pull this side and here’s the second one and you push these through don’t worry you won’t lose them cuz you’re gonna take it out you’ll see you pull this one out same process pull it out there it’s out push it through you have to with the bolts cheap here’s the bulls and this is the fishing finishing touch I’m a paint it in my case okay but see don’t worry about the wires because later putting them back together isn’t easy now let’s move to the left side passenger side it’s really easy this one you don’t even need to take it off like this but you go by right here you take it out and there’s on no no screws nothing on that we start now it’s the same process we’ll all right here it’s the same thing and you
pull it out and the same thing all of them should have a rubber piece on the right side not on the website just put it up this this should be all the same with the euro euro lights minds that you’re right there’s a regular ones just two lights and nothing different just fog lights that’s it well you push it in on zero on the little circle push it up pull it out and there’s two clips over here you push one side you push the other side then you take it out there’s this you got it out and this I like to take it out after because you don’t want to lose the clips to it I’ll show you later here’s one well there’s one boat there’s two boats same t20 same screwdriver and you take it out with the bolts just put them up here and this fishes I don’t know if you see it yeah I think you see yeah there’s same thing with a euro light you take it off you press it and you pull it out and then this is what I was talking about these clips you don’t want to lose them because they follow really quick well that’s the tutorial on how to take out the mints alright thank you
source