Hey guys and welcome to another flame war for this video in this one we’re going to show you how to tape off the side light and the fog light straight after this intro hey guys and welcome back the first thing that you’re going to need to do is grab yourself a couple of tools you don’t need many to do this because it’s quite simple and quite easy to do first of all you’re going to need to get yourself a t25 Torx piece that looks a little bit like that and then to help you out you’re going to need like a little trim tool or maybe a flathead screwdriver just something nice and simple to get one of the connections of that’s bit annoying but so the first thing you need to do is take off this trim it’s really easy it’s just a push and pull so you just pull it this side and slide it towards yourself so comes out this way so you can to pull out and then to the side and then that takes that couple off there the next thing you need to do if you want to gain access to this light here there’s going to be free t25 screws I just go ahead and take those out so you can see the first ones on the right hand side this is exactly the same on the passenger side and the driver side guys so I mean I won’t need to do two videos on both sides because it’s exactly the same like I said here’s the second screw and then there’s another one just down the bottom I will show you one this light where abouts they are just so you might be yourself okay so this comes out nice and easy to get this connection off here all you need to do is push on the back push this toggle on the back down here and then pull forward and then this now comes away this was in like this so there was a screw in here and then they were this side there was a screw there and there was a screw there okay so that’s all that holds that on the bulb that’s in here it stands on the back there’s a 12-volt 51 watt I will put a link to getting these bulbs guys if you need to change a more upgrade them just so you know I don’t need to change these I’m just doing this video for you guys so you know how and then literally just pull they’ve just twists and then there’s like a like a star piece where they come out so it just fits like that put it back in just push it in and then twist and then that’s that done let’s just put that out the way for the minute butter that’s now done if you want to know why it’s so clean in here guys it’s because I’ll quickly show you I’ve been using the steamer to clean all this up so I mean if you want to and you’re into stuff like this grab yourself a steamer and then you’re back to clean up so what I’ve done is I’ve literally just I’ve had it on and I’m just like cleaned in there I’m not going to do it now because he is really steaming it on to go over the length of the camera but that’s how I’ve got that really really nice and cleaned in here all right so to gain access to this like you don’t have to take that out to gain access to this top light but there is a hidden screw and it’s up here upright so all you need to do is feel and then it’s in there somewhere once you found it it’s quite easy to do and then just undo that sometimes expect the your head down on the floor look you can actually undo these move the flat-head screwdriver as well because they do have flathead screwdriver ends on there so you can actually do it with a flathead screwdriver if you want to I can say let me just create shoot sometimes easier to get down on the floor with this at an angle just unscrew it as you can see here guys it’s the sort of anguish at once that screws taken out all you need to do that’s also a t25 guy so like I said you need t25 and and just this really to do everything that you want to do once this is out this is nice and easy so this just literally pops out like that the only thing that’s difficult is this top piece if you’ve got one of these or just a flathead screwdriver that’s got and then you just need to put it underneath here just to slide out the connector so once you slid that down I’m a connector pulls off nice and easy so just push that connector up there this one that houses like the five by one bulb which beside light bulk is literally just a pool so if you can see there that’s where the side light bulb went into this section here and that it should just to push rip I’ve got blue upgraded ones in there I didn’t do that myself it came with the car and then that connector there was very tight so there’s not much room so once you’ve got that off lights out like this once the lights out you can take this bit out and then that access is the bulb down this looks like a big-time Wonderbolt to me to be fair and the wattage on there it says it’s a h21 watt so that’s a h21 what a ward like I say put a link to getting these bulbs if you want upgrade them or just get the standard ones I’m not going to bother and I’m grating in mine because they work absolutely fine which is good to put it back nice and simple all you need to do I started off with in the side light bulb one in first so all you need to do is push this back over the top so it’s an easy make sure it clicks and then slide this connector over top here make sure that clicks and then there’s a little locating lug here that has to go into that whole day you can see it on there can’t you so that’s where that goes now you just push that in there and then again get back on the floor it’s going to be easy to put some down if you want to you can wear gloves but I’ve cleaned everything so that I don’t have to put gloves on guys so then screw that back up nice and easy plus safely in place go back in here and fish around or you connect that one very far just to quickly mention guys if you are looking to replace your horn and your horn isn’t working that can be accessed from here as well your horn is like literally just there you can’t see it but right there is the horn so I mean if you’re going to do the horn on it that’s a good opportunity to be able to do it and then you’ll know that it’s on the passenger side so I mean if it’s in a different country I’m getting maybe it’ll be on the driver side I’m not too sure whether they change them or not I really don’t know so that make sure you fit back in there guys I’m going to show you all the way through so you can see put the screws back in I said this can be done up with a flathead screwdriver I’ll quickly show you what I mean by saying it can be done up with my flat with over the Great British range of about to come so I’m going to show you just the hope rained off if you see on here that you can use it you can use a TP a star P sorry or you can use a flathead screwdriver in their problem about their videos in England guys it’s raining when it’s sunny we don’t get much time sunshine it’s always raining always overcast let there wasn’t any rain today black and fill a few spots already so hope it doesn’t downpour will ruin on my equipment but so when that’s all back in guys I mean do go ahead and check they’re all works but this is just for this video purpose of this video I’m not going to check it is there’s no point I haven’t changed anything go upgraded anything once that’s all working and you’re happy with it then all you need to do is slide this back on so like I said it’s got locating lugs in here which go in at an angle you have to put it back in at an angle so just put it back on push it on there make sure that these click in place like so there you go just give it a little tap that’s it guys that is how you change the bulbs in the bumper on a VW Scirocco 2008 plate I don’t think they’re change very much I mean the newer models there’s a bit of am a spiders I’m not sure how you describe it it’s like free of these spike bits but I’m pretty sure it’s probably much much the same so that’s how you do it on this version anyway thanks for watching guys and take care and subscribe for more videos like this see ya
source